產品詳情

產品概述 Product overview

光伏并網柜適用于地面集中式、地面組串式、地面分布式等電力用戶的交流 50Hz，額定工作電壓 380V，額定工作電流 2000A 的配電系統，做為動力、照明及配電設備的電能轉換、分配與控制之用。 

產品具有分?jǐn)嗄芰Ω摺?dòng)熱穩定性好、電氣方案靈活、 組合方便、實用性強，結構新穎、防護等級高等特點?？勺鳛榈蛪撼商组_關設備的更新?lián)Q代產品使用。

Photovoltaic grid-connected cabinet is suitable for power distribution systems with 50Hz AC, 380V rated working voltage and 2,000 A rated working current for ground centralized, ground group series and ground distributed power users. It is used for power conversion, distribution and control of power, lighting and power distribution equipment. 

The product has the characteristics of high breaking capacity, good dynamic thermal stability, flexible electrical scheme, convenient combination, strong practicability, novel structure, high protection level, etc. It can be used as a replacement for low-voltage switchgear. 

Type A. C. low-voltage distribution cabinet conforms to IEC439 "Low-voltage switchgear and control equipment" and GB7251 "Low-voltage switchgear and control equipment" and other standards.

正常使用環境 Normal operating environment

◇周圍空氣溫度不高于 +40℃，不低于 -5℃。24h 以內的平均溫度不得高于 +35℃。 

◇戶內安裝使用，使用地點的海拔高度不得超過 2000m。 

◇周圍空氣相對濕度在溫度為 +40℃時不超過 50％，在較低溫度時允許有較大的相對濕度。( 例如 +20℃時為 90％ ) 應考慮到由于溫度變化可能會偶然產生凝露的影響。 

◇設備安裝時與垂直面的傾斜度不超過 5°。 

◇設備應安裝在無劇烈震動和沖擊的地方，以及不足以使電器元件受到腐蝕的場所。 

◇用戶有特別要求時與制造廠協商解決。 

◇ Ambient air temperature is not higher than +40℃ and not lower than -5℃ . The average temperature within 24 hours shall not be higher than+35℃ . 

◇ For indoor installation and use, the altitude of the place of use shall not exceed 2000m m. 

◇ The relative humidity of ambient air shall not exceed 50% at the highest temperature of +40℃ , and a larger relative humidity is allowed at the lower temperature. (for example, 90% at +20℃ ) consideration should be given to the effect that condensation may occasionally occur due to temperature changes. 

◇ When the equipment is installed, the inclination to the vertical plane shall not exceed 5. 

◇ The equipment shall be installed in places free from severe vibration and impact, and places insufficient to corrode electrical components. 

◇ When users have special requirements, negotiate with the manufacturer to solve them.